English
Français
Italiano
Related Products
The Palmella holds the shell casings still, preventing it from overturning the contents during the loading phase.
Available in:
cal.12/16-20/24-28/32-36/410-8 flobert
The Borre trim made of aluminum is designed to perform a precise trimming cut for the pipe edging of any model and brand, via a register screw for the desired heights.
Available in gauges 10/12/16/20/24/28/32/36/410
Steel Counter-coil with universal external burnishing with rings inside suitable for Cal. 12 at Cal. 36/410 with M6 thread and complete with support and locking nut.
It is used for the placement of the casing in the phase of stellar engraving
The shell casings trim has a steel structure with a two-way blade and protective dial is provided complete for 4 calibers of your choice (10/12/16/20/24/28/32/36).
It can be used manually, or mounted on a drill with the appropriate screw provided or hempress in place of the hem, thus precisely adjusting the height of the casing.
This is an steel guide bushing, which is applied to the wheel reel and fastened with a lateral threaded grain.
Facilitates and guides the insertion of the casing in the hemming phase, respecting the vertical position.
Rotating engraver in tempered cemented steel, by means of an integrated system it allows to turn freely resuming with the “search folds” the folds of the recovery casings and stops at the point where the previous stellar had been made.
Available from Cal. 10 to Cal. 36/410
The support for the rotating engraver has been done with CNC machining, with bearing inside to turn free and to search for the folds on the shells already fired.
Universal with M6 male connection and compatible with all types of engravers, it can be mounted directly on GAEP machines, or directly on a column drill.
Made with numerical control machines in cemented steel and tempered with three cutting blades, universal and suitable for all calipers from Cal. 10 to Cal. 36/410 and can be applied to a column drill or manual screwdriver by means of a special steel screw in Supplied, made with M6 female thread and can be applied to any type of manual machine.
TIMBRO LASTRA 1 The slab 1 is: included in the Gaep Linear Printer kit and contains such as: brand powders, lead numbering, animal figures, gauges and casings heights.
Cut out the individual pieces of the stamp by forming a puzzle and attach them directly with a double sticker on the stamp door.
The size of the slab 1 is: 160 x 340 mm
TIMBRO LASTRA 2 The slab 2 is sold on request and contains: alphabet, brand powders, lead numbering, animal figures, casings and casings heights and various quotation slashes.
Cut out the individual pieces of the stamp by forming a puzzle and attach them directly with a double sticker on the stamp door.
The size of the slab 2 is: 160 x 340 mm
TIMBRO LASTRA 3 The slab 3 is sold on request and contains: alphabet, brand powders, lead numbering, animal figures, casings and casings heights and various quotation slashes.
Cut out the individual pieces of the stamp by forming a puzzle and attach them directly with a double sticker on the stamp door.
The size of the slab 3 is: 160 x 340 m
REQUIRED REQUIRED On demand, custom stamps are performed.
Steel coator made with CNC precision machinery.
To be used after the phase of stellar engraving (engraving-coking-lowering-hemming).
Socket M6 female, available with threaded screw for manual or column drill attachment.
Available in gauges 10/12/16/20/24/28/32/36/410
The flattener is a fundamental tool to stabilize the plastic
of the shell before the passage of the hem, this operation
serves to ensure that the hem does not undergo changes
in height once the cartridge is finished.
M6 female mount, available in all calibers.