English
Français
Italiano
The flattener
The flattener is a fundamental tool to stabilize the plastic
of the shell before the passage of the hem, this operation
serves to ensure that the hem does not undergo changes
in height once the cartridge is finished.
M6 female mount, available in all calibers.
Related Products
Tool to be used to draw 3/4/5 petals on a borre sheath tube type LB6 and any type of Borre and can be mounted on the entire range of our GAEP machines and drilling machine on column drill.
Available in gauges 8 -10-12-16-20-24-28-32-36/410
Max Cutting Depth 55mm
Steel tool made with C.N.C., cemented and tempered machines, hand-cut and sharpening, with M 6 thread for drill attachment or any manual press, to be used for cutting cardboard and cork discs, complete with steel screw for Attachment and base for cutting.
Available in gauges 10/12/16/20/24/28/32/36/410
The shell casings trim has a steel structure with a two-way blade and protective dial is provided complete for 4 calibers of your choice (10/12/16/20/24/28/32/36).
It can be used manually, or mounted on a drill with the appropriate screw provided or hempress in place of the hem, thus precisely adjusting the height of the casing.
Low-profile coil made of steel with controlled machining
Numeric in one piece, indispensable to be used after the crimping phase at 4/6/8 Pliche.
Available in 10/12/16/20/24/28/32/36/410 gauges.
Engraver in cemented and tempered steel for the stellar closure (at 4 – 5 – 6 – 8 phasing).
Available in all gauges.
10/12/16/20/24/28/32/36/410
This is a manual oiler to be applied on the front with a motor flange fixing screw, compatible with any brand of relofading machine. Adjustable position by side knob.
The support for the rotating engraver has been done with CNC machining, with bearing inside to turn free and to search for the folds on the shells already fired.
Universal with M6 male connection and compatible with all types of engravers, it can be mounted directly on GAEP machines, or directly on a column drill.
Rotating engraver in tempered cemented steel, by means of an integrated system it allows to turn freely resuming with the “search folds” the folds of the recovery casings and stops at the point where the previous stellar had been made.
Available from Cal. 10 to Cal. 36/410
The Palmella holds the shell casings still, preventing it from overturning the contents during the loading phase.
Available in:
cal.12/16-20/24-28/32-36/410-8 flobert
Steel spreading machine with CNC machines with external burnishing, to be used to enlarge the mouth of the fired casing and facilitates the insertion of the wad into the casing. It can be used in any manual or column drill, by means of a special steel screw supplied, made with M6 female thread and can be applied to any type of manual ortho-Machine.
Universal for the following caliper 10/12/16/20/24/28/32/36/410