English
Français
Italiano
Wad Slitter
Tool to be used to draw 3/4/5 petals on a borre sheath tube type LB6 and any type of Borre and can be mounted on the entire range of our GAEP machines and drilling machine on column drill.
Available in gauges 8 -10-12-16-20-24-28-32-36/410
Max Cutting Depth 55mm
Related Products
Rotating engraver in tempered cemented steel, by means of an integrated system it allows to turn freely resuming with the “search folds” the folds of the recovery casings and stops at the point where the previous stellar had been made.
Available from Cal. 10 to Cal. 36/410
This is an steel guide bushing, which is applied to the wheel reel and fastened with a lateral threaded grain.
Facilitates and guides the insertion of the casing in the hemming phase, respecting the vertical position.
Countercoil in steel with universal conical burnishing and smooth inside suitable for Cal. 12 at Cal. 36/410, with thread M6 and complete with support and nut for clamping.
It is used for positioning the casing in the Hemming phase in order to avoid the rotation of the casing.
TIMBRO LASTRA 1 The slab 1 is: included in the Gaep Linear Printer kit and contains such as: brand powders, lead numbering, animal figures, gauges and casings heights.
Cut out the individual pieces of the stamp by forming a puzzle and attach them directly with a double sticker on the stamp door.
The size of the slab 1 is: 160 x 340 mm
TIMBRO LASTRA 2 The slab 2 is sold on request and contains: alphabet, brand powders, lead numbering, animal figures, casings and casings heights and various quotation slashes.
Cut out the individual pieces of the stamp by forming a puzzle and attach them directly with a double sticker on the stamp door.
The size of the slab 2 is: 160 x 340 mm
TIMBRO LASTRA 3 The slab 3 is sold on request and contains: alphabet, brand powders, lead numbering, animal figures, casings and casings heights and various quotation slashes.
Cut out the individual pieces of the stamp by forming a puzzle and attach them directly with a double sticker on the stamp door.
The size of the slab 3 is: 160 x 340 m
REQUIRED REQUIRED On demand, custom stamps are performed.
Engraver in cemented and tempered steel for the stellar closure (at 4 – 5 – 6 – 8 phasing).
Available in all gauges.
10/12/16/20/24/28/32/36/410
Steel spreading machine with CNC machines with external burnishing, to be used to enlarge the mouth of the fired casing and facilitates the insertion of the wad into the casing. It can be used in any manual or column drill, by means of a special steel screw supplied, made with M6 female thread and can be applied to any type of manual ortho-Machine.
Universal for the following caliper 10/12/16/20/24/28/32/36/410
This is a manual oiler to be applied on the front with a motor flange fixing screw, compatible with any brand of relofading machine. Adjustable position by side knob.
Steel tool made with C.N.C., cemented and tempered machines, hand-cut and sharpening, with M 6 thread for drill attachment or any manual press, to be used for cutting cardboard and cork discs, complete with steel screw for Attachment and base for cutting.
Available in gauges 10/12/16/20/24/28/32/36/410
Steel coator made with CNC precision machinery.
To be used after the phase of stellar engraving (engraving-coking-lowering-hemming).
Socket M6 female, available with threaded screw for manual or column drill attachment.
Available in gauges 10/12/16/20/24/28/32/36/410
The shell casings trim has a steel structure with a two-way blade and protective dial is provided complete for 4 calibers of your choice (10/12/16/20/24/28/32/36).
It can be used manually, or mounted on a drill with the appropriate screw provided or hempress in place of the hem, thus precisely adjusting the height of the casing.