Support for the rotating engraver
The support for the rotating engraver has been done with CNC machining, with bearing inside to turn free and to search for the folds on the shells already fired.
Universal with M6 male connection and compatible with all types of engravers, it can be mounted directly on GAEP machines, or directly on a column drill.
Related Products
Low-profile coil made of steel with controlled machining
Numeric in one piece, indispensable to be used after the crimping phase at 4/6/8 Pliche.
Available in 10/12/16/20/24/28/32/36/410 gauges.
Support in threaded M6 steel with inlay (spool), executed in one piece with CNC machines, universal and compatible with any type of steel or brass coil.
The screw can be inserted in any manual or column drill, thus obtaining in the closing phase of the cartridge a perfect rotation in the axis of the coil itself.
This is an steel guide bushing, which is applied to the wheel reel and fastened with a lateral threaded grain.
Facilitates and guides the insertion of the casing in the hemming phase, respecting the vertical position.
The Electric Welder Mod. FUSION 1500/3 with three-station re-sealer ideal for hunters, shooters, armories that require personalized loading and content.
You can perform all heights from 50mm to 89mm
Universal stations from cal.10 to cal.36 / 410
The three stations are separately adjustable.
Engraver in cemented and tempered steel for the stellar closure (at 4 – 5 – 6 – 8 phasing).
Available in all gauges.
10/12/16/20/24/28/32/36/410
Steel Counter-coil with universal external burnishing with rings inside suitable for Cal. 12 at Cal. 36/410 with M6 thread and complete with support and locking nut.
It is used for the placement of the casing in the phase of stellar engraving
New and revolutionary “micrometric” system that allows to carry out ever more precise and constant dust weighing thanks to the tank emptying system and micrometric millesimal advancement.
Body and structure in steel, Nikel and aluminium CNC machined with quality and precision materials, antistatic glass tube for dust.
Powder from 0.15 gr to 5.00 grams, precise and punctual centesimal weighted intermediates.
Every single weighing is 60 g. of lead, precise and punctual centesimal intermediate weights.
Steel spreading machine with CNC machines with external burnishing, to be used to enlarge the mouth of the fired casing and facilitates the insertion of the wad into the casing. It can be used in any manual or column drill, by means of a special steel screw supplied, made with M6 female thread and can be applied to any type of manual ortho-Machine.
Universal for the following caliper 10/12/16/20/24/28/32/36/410
The new Electric Manual Edging Machine Mod. FALCON 1000/2 ideal for hunters, shooters, armories that require a personalized and contained loading.
You can perform all heights from 50mm to 89mm
Universal stations from cal.10 to cal.36 / 410
The two stations are separately adjustable.
Bench tool to quickly facilitate the insertion of wads, container on used shell casings.
Available in all calibers 10-12-16-20-24-28-32-36/410.
Rotating engraver in tempered cemented steel, by means of an integrated system it allows to turn freely resuming with the “search folds” the folds of the recovery casings and stops at the point where the previous stellar had been made.
Available from Cal. 10 to Cal. 36/410
The Electric Welder Mod. ROVER 2000/4 with four stations with rebutton and coneder, ideal for hunters, shooters, armories that require a personalized loading and content.
You can perform all heights from 50mm to 89mm
Universal stations from cal.10 to cal.36 / 410
The four stations are separately adjustable.
Complete with cartridge closing height adjustment index with millimeter side table and new manual oiler.