English
Français
Italiano
Products
-
MASTER PLUS 2500/5
The Electric Welder Mod. Master Plus 2500/5 with four stations with rebutton and coneder, ideal for hunters, shooters, armories that require a personalized loading and content.
You can perform all heights from 50mm to 89mm
Universal stations from cal.10 to cal.36 / 410
The four stations are separately adjustable.
Complete with cartridge closing height adjustment index with millimeter side table and new manual oiler.
-
ROVER 2000/4
The Electric Welder Mod. ROVER 2000/4 with four stations with rebutton and coneder, ideal for hunters, shooters, armories that require a personalized loading and content.
You can perform all heights from 50mm to 89mm
Universal stations from cal.10 to cal.36 / 410
The four stations are separately adjustable.
Complete with cartridge closing height adjustment index with millimeter side table and new manual oiler.
-
FUSION 1500/3
The Electric Welder Mod. FUSION 1500/3 with three-station re-sealer ideal for hunters, shooters, armories that require personalized loading and content.
You can perform all heights from 50mm to 89mm
Universal stations from cal.10 to cal.36 / 410
The three stations are separately adjustable.
-
FALCON 1000/2
The new Electric Manual Edging Machine Mod. FALCON 1000/2 ideal for hunters, shooters, armories that require a personalized and contained loading.
You can perform all heights from 50mm to 89mm
Universal stations from cal.10 to cal.36 / 410
The two stations are separately adjustable.
-
VISION 950 / 5 Plus
The Mod. VISION 950 / 5 plus Manual Electric Edger with four stations complete with steel coil with shirt,
engraver in hardened and tempered steel with 6 folds, steel taper and steel lowered, ideal for hunters, shooters, armories that require a personalized loading and content.You can perform all heights from 50mm to 89mm
Universal stations from cal.10 to cal.36 / 410
The four stations are separately adjustable.
-
CONDOR 850/4
The Mod. CONDOR 850/4 Manual Electric Edger with four stations complete with steel coil with shirt,
engraver in hardened and tempered steel with 6 folds, steel taper and steel lowered, ideal for hunters, shooters, armories that require a personalized loading and content.You can perform all heights from 50mm to 89mm
Universal stations from cal.10 to cal.36 / 410
The four stations are separately adjustable.
-
FALCON 750/3
The Electronic Manual Edging Machine Mod. FALCON 750/3 with three stations complete with steel coil with shirt,
engraver in cemented and tempered steel with 6 folds, steel rebator, ideal for hunters, shooters, armories that require personalized loading and content.
You can perform all heights from 50mm to 89mm
Universal stations from cal.10 to cal.36 / 410
The three stations are separately adjustable.
-
GAEP SIMPLE 500/2
The Electric manual drilling machine Mod. SIMPLE 500/2 with two stations complete with steel coil with shirt, engraver in cemented steel and tempered with 6 pliche, steel lowering unit, ideal for hunters, shooters, Armorie requiring a personalized loading and content.
You can perform all heights from 50mm to 89mm
Universal stations from Cal. 10 to Cal. 36/410
The two stations are separately adjustable.
-
VS- DRILL PRESS
The new three-station hunting cartridge loading press for use under the column drill, or with a simple manual drill.
The complete kit consists of an engraver steel coil (6-psychic steel), a steel lowerer and a manual drill adapter.
Universal in stations from cal.10 to cal.36/410, you can run all heights from 40mm to 89mm in all gauges.
-
GAEP POWDER DISPENSER MICROMETRIC
New and revolutionary “micrometric” system that allows to carry out ever more precise and constant dust weighing thanks to the tank emptying system and micrometric millesimal advancement.
Body and structure in steel, Nikel and aluminium CNC machined with quality and precision materials, antistatic glass tube for dust.
Powder from 0.15 gr to 5.00 grams, precise and punctual centesimal weighted intermediates.
-
GAEP LEAD DOSING UNIT MICROMETRIC
New and revolutionary “micrometric” system that allows to carry out more precise and constant weighing of lead thanks to the tank emptying system and micrometric feed.
Body and structure in steel, Nikel and aluminium CNC machined with quality and precision materials, Plexiglass pipe for lead.
Every single weighing is 60 grams of lead, precise and punctual centesimal intermediate weights.
-
GAEP DOUBLE POWDER AND LEAD DOSING UNIT
New and revolutionary “micrometric” system that allows to carry out ever more precise and constant dust weighing thanks to the tank emptying system and micrometric millesimal advancement.
Body and structure in steel, Nikel and aluminium CNC machined with quality and precision materials, antistatic glass tube for dust.
Powder from 0.15 gr to 5.00 grams, precise and punctual centesimal weighted intermediates.
Every single weighing is 60 g. of lead, precise and punctual centesimal intermediate weights.
-
Gaep Wad inserting machine
Bench tool to quickly facilitate the insertion of wads, container on used shell casings.
Available in all calibers 10-12-16-20-24-28-32-36/410.
-
GAEP DUAL calibrator
The GAEP DUAL calibrator from Banco is simple and functional as use has been designed and manufactured with two stations.
– casing recalibration and off trigger undock.
– insertion of new trigger.
At the same time you can recalibrate 2 shell casings at a time, available in the following calibers: 8/10/12/16/20/24/28/32/36/410
All types of caseback from T1 to T5 with caliber bushing replacement.
-
-
Palmella Shotshell holder
The Palmella holds the shell casings still, preventing it from overturning the contents during the loading phase.
Available in:
cal.12/16-20/24-28/32-36/410-8 flobert
-
The flattener
The flattener is a fundamental tool to stabilize the plastic
of the shell before the passage of the hem, this operation
serves to ensure that the hem does not undergo changes
in height once the cartridge is finished.
M6 female mount, available in all calibers.
-
Support for the rotating engraver
The support for the rotating engraver has been done with CNC machining, with bearing inside to turn free and to search for the folds on the shells already fired.
Universal with M6 male connection and compatible with all types of engravers, it can be mounted directly on GAEP machines, or directly on a column drill.
-
Rotating Star Crimper
Rotating engraver in tempered cemented steel, by means of an integrated system it allows to turn freely resuming with the “search folds” the folds of the recovery casings and stops at the point where the previous stellar had been made.
Available from Cal. 10 to Cal. 36/410
-
Steel Punch Die (FUSTELLA)
Steel tool made with C.N.C., cemented and tempered machines, hand-cut and sharpening, with M 6 thread for drill attachment or any manual press, to be used for cutting cardboard and cork discs, complete with steel screw for Attachment and base for cutting.
Available in gauges 10/12/16/20/24/28/32/36/410
-
Wad Trimmer
The Borre trim made of aluminum is designed to perform a precise trimming cut for the pipe edging of any model and brand, via a register screw for the desired heights.
Available in gauges 10/12/16/20/24/28/32/36/410
-
Manual Oiler
This is a manual oiler to be applied on the front with a motor flange fixing screw, compatible with any brand of relofading machine. Adjustable position by side knob.
-
Wad Slitter
Tool to be used to draw 3/4/5 petals on a borre sheath tube type LB6 and any type of Borre and can be mounted on the entire range of our GAEP machines and drilling machine on column drill.
Available in gauges 8 -10-12-16-20-24-28-32-36/410
Max Cutting Depth 55mm
-
Gaep Engraver
Engraver in cemented and tempered steel for the stellar closure (at 4 – 5 – 6 – 8 phasing).
Available in all gauges.
10/12/16/20/24/28/32/36/410 -
LINEAR PRINTER
The new linear and manual printer for empty and full casings, prints all the gauges and available in the gauges 10/12/16/20/24/28/32/36/410 dedicated to amateurs of home charging to customize their cartridges.
Simple and fast, print figures, numbers, logos, labels and everything you want to print on the shell casings.KIT STAMPATRICE GAEP LINEAR PRINTER
– Printing Machine
– 1 full sheet cliché 340 mm x 160 mm
– 1 Professional black ink tube in Pasta
– 1 roll of double-sided tape
– 1 pair of latex gloves
– 4 stamp holder with magnets
– Instructions for use -
Professional ink
The Professional ink in paste has been expressly formulated for use on printers for cases in plastic and cardboard.
Professional ink in paste differs for greater fluidity, high concentration, opacity, brightness, high anchorage, resistance to rubbing and quick drying.
Available in tubes of 50 gr. and 150 gr.
Available colors: Black, White, Silver, Gold, Red, Blue, Yellow, Green.
-
TIMBRO LASTRA 1,2,3,4,5,6
TIMBRO LASTRA 1 The slab 1 is: included in the Gaep Linear Printer kit and contains such as: brand powders, lead numbering, animal figures, gauges and casings heights.
Cut out the individual pieces of the stamp by forming a puzzle and attach them directly with a double sticker on the stamp door.
The size of the slab 1 is: 160 x 340 mmTIMBRO LASTRA 2 The slab 2 is sold on request and contains: alphabet, brand powders, lead numbering, animal figures, casings and casings heights and various quotation slashes.
Cut out the individual pieces of the stamp by forming a puzzle and attach them directly with a double sticker on the stamp door.
The size of the slab 2 is: 160 x 340 mmTIMBRO LASTRA 3 The slab 3 is sold on request and contains: alphabet, brand powders, lead numbering, animal figures, casings and casings heights and various quotation slashes.
Cut out the individual pieces of the stamp by forming a puzzle and attach them directly with a double sticker on the stamp door.
The size of the slab 3 is: 160 x 340 m
REQUIRED REQUIRED On demand, custom stamps are performed. -
Case Trimmer
The shell casings trim has a steel structure with a two-way blade and protective dial is provided complete for 4 calibers of your choice (10/12/16/20/24/28/32/36).
It can be used manually, or mounted on a drill with the appropriate screw provided or hempress in place of the hem, thus precisely adjusting the height of the casing.
-
MONEYER
Steel coator made with CNC precision machinery.
To be used after the phase of stellar engraving (engraving-coking-lowering-hemming).
Socket M6 female, available with threaded screw for manual or column drill attachment.
Available in gauges 10/12/16/20/24/28/32/36/410
-
RIBASSATORE
Low-profile coil made of steel with controlled machining
Numeric in one piece, indispensable to be used after the crimping phase at 4/6/8 Pliche.
Available in 10/12/16/20/24/28/32/36/410 gauges. -
Universal Arbor
Support in threaded M6 steel with inlay (spool), executed in one piece with CNC machines, universal and compatible with any type of steel or brass coil.
The screw can be inserted in any manual or column drill, thus obtaining in the closing phase of the cartridge a perfect rotation in the axis of the coil itself.
-
Spreading Tool
Steel spreading machine with CNC machines with external burnishing, to be used to enlarge the mouth of the fired casing and facilitates the insertion of the wad into the casing. It can be used in any manual or column drill, by means of a special steel screw supplied, made with M6 female thread and can be applied to any type of manual ortho-Machine.
Universal for the following caliper 10/12/16/20/24/28/32/36/410
-
Universal Skiver
Made with numerical control machines in cemented steel and tempered with three cutting blades, universal and suitable for all calipers from Cal. 10 to Cal. 36/410 and can be applied to a column drill or manual screwdriver by means of a special steel screw in Supplied, made with M6 female thread and can be applied to any type of manual machine.
-
Steel Collar for Crimpers
This is an steel guide bushing, which is applied to the wheel reel and fastened with a lateral threaded grain.
Facilitates and guides the insertion of the casing in the hemming phase, respecting the vertical position.
-
Countercoil in steel
Countercoil in steel with universal conical burnishing and smooth inside suitable for Cal. 12 at Cal. 36/410, with thread M6 and complete with support and nut for clamping.
It is used for positioning the casing in the Hemming phase in order to avoid the rotation of the casing.
-
Steel Counter coil
Steel Counter-coil with universal external burnishing with rings inside suitable for Cal. 12 at Cal. 36/410 with M6 thread and complete with support and locking nut.
It is used for the placement of the casing in the phase of stellar engraving
-
Crimp Finishers
STP Cemented steel coil for stellar closure plastic casing
OTC Cemented steel coil for sealing round rim for cardboard casings.
STC Steel coil cemented for stellar closure cardboard casings.
OTP Cemented steel coil for round rim closure for plastic casing.
BOP Coil in cemented steel for ball cartridges with round rim closure.
BN1/BN2/BN3/BN4 cemented steel coil for stellar closure.
