English
Français
Italiano
Wad Slitter
Tool to be used to draw 3/4/5 petals on a borre sheath tube type LB6 and any type of Borre and can be mounted on the entire range of our GAEP machines and drilling machine on column drill.
Available in gauges 8 -10-12-16-20-24-28-32-36/410
Max Cutting Depth 55mm
Related Products
Steel tool made with C.N.C., cemented and tempered machines, hand-cut and sharpening, with M 6 thread for drill attachment or any manual press, to be used for cutting cardboard and cork discs, complete with steel screw for Attachment and base for cutting.
Available in gauges 10/12/16/20/24/28/32/36/410
Steel spreading machine with CNC machines with external burnishing, to be used to enlarge the mouth of the fired casing and facilitates the insertion of the wad into the casing. It can be used in any manual or column drill, by means of a special steel screw supplied, made with M6 female thread and can be applied to any type of manual ortho-Machine.
Universal for the following caliper 10/12/16/20/24/28/32/36/410
This is an steel guide bushing, which is applied to the wheel reel and fastened with a lateral threaded grain.
Facilitates and guides the insertion of the casing in the hemming phase, respecting the vertical position.
The shell casings trim has a steel structure with a two-way blade and protective dial is provided complete for 4 calibers of your choice (10/12/16/20/24/28/32/36).
It can be used manually, or mounted on a drill with the appropriate screw provided or hempress in place of the hem, thus precisely adjusting the height of the casing.
Support in threaded M6 steel with inlay (spool), executed in one piece with CNC machines, universal and compatible with any type of steel or brass coil.
The screw can be inserted in any manual or column drill, thus obtaining in the closing phase of the cartridge a perfect rotation in the axis of the coil itself.
Engraver in cemented and tempered steel for the stellar closure (at 4 – 5 – 6 – 8 phasing).
Available in all gauges.
10/12/16/20/24/28/32/36/410
STP Cemented steel coil for stellar closure plastic casing
OTC Cemented steel coil for sealing round rim for cardboard casings.
STC Steel coil cemented for stellar closure cardboard casings.
OTP Cemented steel coil for round rim closure for plastic casing.
BOP Coil in cemented steel for ball cartridges with round rim closure.
BN1/BN2/BN3/BN4 cemented steel coil for stellar closure.
Made with numerical control machines in cemented steel and tempered with three cutting blades, universal and suitable for all calipers from Cal. 10 to Cal. 36/410 and can be applied to a column drill or manual screwdriver by means of a special steel screw in Supplied, made with M6 female thread and can be applied to any type of manual machine.
Steel Counter-coil with universal external burnishing with rings inside suitable for Cal. 12 at Cal. 36/410 with M6 thread and complete with support and locking nut.
It is used for the placement of the casing in the phase of stellar engraving
The support for the rotating engraver has been done with CNC machining, with bearing inside to turn free and to search for the folds on the shells already fired.
Universal with M6 male connection and compatible with all types of engravers, it can be mounted directly on GAEP machines, or directly on a column drill.