English
Français
Italiano
Universal Skiver
Made with numerical control machines in cemented steel and tempered with three cutting blades, universal and suitable for all calipers from Cal. 10 to Cal. 36/410 and can be applied to a column drill or manual screwdriver by means of a special steel screw in Supplied, made with M6 female thread and can be applied to any type of manual machine.
Related Products
Low-profile coil made of steel with controlled machining
Numeric in one piece, indispensable to be used after the crimping phase at 4/6/8 Pliche.
Available in 10/12/16/20/24/28/32/36/410 gauges.
The shell casings trim has a steel structure with a two-way blade and protective dial is provided complete for 4 calibers of your choice (10/12/16/20/24/28/32/36).
It can be used manually, or mounted on a drill with the appropriate screw provided or hempress in place of the hem, thus precisely adjusting the height of the casing.
STP Cemented steel coil for stellar closure plastic casing
OTC Cemented steel coil for sealing round rim for cardboard casings.
STC Steel coil cemented for stellar closure cardboard casings.
OTP Cemented steel coil for round rim closure for plastic casing.
BOP Coil in cemented steel for ball cartridges with round rim closure.
BN1/BN2/BN3/BN4 cemented steel coil for stellar closure.
Rotating engraver in tempered cemented steel, by means of an integrated system it allows to turn freely resuming with the “search folds” the folds of the recovery casings and stops at the point where the previous stellar had been made.
It can be applied on every model of MEC press.
Available from Cal. 10 to Cal. 36/410
Engraver in cemented and tempered steel for the stellar closure (at 4 – 5 – 6 – 8 phasing).
Available in all gauges.
10/12/16/20/24/28/32/36/410
Tool to be used to draw 3/4/5 petals on a borre sheath tube type LB6 and any type of Borre and can be mounted on the entire range of our GAEP machines and drilling machine on column drill.
Available in gauges 8 -10-12-16-20-24-28-32-36/410
Max Cutting Depth 55mm
Steel Counter-coil with universal external burnishing with rings inside suitable for Cal. 12 at Cal. 36/410 with M6 thread and complete with support and locking nut.
It is used for the placement of the casing in the phase of stellar engraving
This is an steel guide bushing, which is applied to the wheel reel and fastened with a lateral threaded grain.
Facilitates and guides the insertion of the casing in the hemming phase, respecting the vertical position.
Steel spreading machine with CNC machines with external burnishing, to be used to enlarge the mouth of the fired casing and facilitates the insertion of the wad into the casing. It can be used in any manual or column drill, by means of a special steel screw supplied, made with M6 female thread and can be applied to any type of manual ortho-Machine.
Universal for the following caliper 10/12/16/20/24/28/32/36/410
TIMBRO LASTRA 1 The slab 1 is: included in the Gaep Linear Printer kit and contains such as: brand powders, lead numbering, animal figures, gauges and casings heights.
Cut out the individual pieces of the stamp by forming a puzzle and attach them directly with a double sticker on the stamp door.
The size of the slab 1 is: 160 x 340 mm
TIMBRO LASTRA 2 The slab 2 is sold on request and contains: alphabet, brand powders, lead numbering, animal figures, casings and casings heights and various quotation slashes.
Cut out the individual pieces of the stamp by forming a puzzle and attach them directly with a double sticker on the stamp door.
The size of the slab 2 is: 160 x 340 mm
TIMBRO LASTRA 3 The slab 3 is sold on request and contains: alphabet, brand powders, lead numbering, animal figures, casings and casings heights and various quotation slashes.
Cut out the individual pieces of the stamp by forming a puzzle and attach them directly with a double sticker on the stamp door.
The size of the slab 3 is: 160 x 340 m
REQUIRED REQUIRED On demand, custom stamps are performed.