English
Français
Italiano
Related Products
The support for the rotating engraver has been done with CNC machining, with bearing inside to turn free and to search for the folds on the shells already fired.
Universal with M6 male connection and compatible with all types of engravers, it can be mounted directly on GAEP machines, or directly on a column drill.
The flattener is a fundamental tool to stabilize the plastic
of the shell before the passage of the hem, this operation
serves to ensure that the hem does not undergo changes
in height once the cartridge is finished.
M6 female mount, available in all calibers.
Steel spreading machine with CNC machines with external burnishing, to be used to enlarge the mouth of the fired casing and facilitates the insertion of the wad into the casing. It can be used in any manual or column drill, by means of a special steel screw supplied, made with M6 female thread and can be applied to any type of manual ortho-Machine.
Universal for the following caliper 10/12/16/20/24/28/32/36/410
Rotating engraver in tempered cemented steel, by means of an integrated system it allows to turn freely resuming with the “search folds” the folds of the recovery casings and stops at the point where the previous stellar had been made.
Available from Cal. 10 to Cal. 36/410
Support in threaded M6 steel with inlay (spool), executed in one piece with CNC machines, universal and compatible with any type of steel or brass coil.
The screw can be inserted in any manual or column drill, thus obtaining in the closing phase of the cartridge a perfect rotation in the axis of the coil itself.
Made with numerical control machines in cemented steel and tempered with three cutting blades, universal and suitable for all calipers from Cal. 10 to Cal. 36/410 and can be applied to a column drill or manual screwdriver by means of a special steel screw in Supplied, made with M6 female thread and can be applied to any type of manual machine.
Low-profile coil made of steel with controlled machining
Numeric in one piece, indispensable to be used after the crimping phase at 4/6/8 Pliche.
Available in 10/12/16/20/24/28/32/36/410 gauges.
Engraver in cemented and tempered steel for the stellar closure (at 4 – 5 – 6 – 8 phasing).
Available in all gauges.
10/12/16/20/24/28/32/36/410
Tool to be used to draw 3/4/5 petals on a borre sheath tube type LB6 and any type of Borre and can be mounted on the entire range of our GAEP machines and drilling machine on column drill.
Available in gauges 8 -10-12-16-20-24-28-32-36/410
Max Cutting Depth 55mm
Steel coator made with CNC precision machinery.
To be used after the phase of stellar engraving (engraving-coking-lowering-hemming).
Socket M6 female, available with threaded screw for manual or column drill attachment.
Available in gauges 10/12/16/20/24/28/32/36/410
STP Cemented steel coil for stellar closure plastic casing
OTC Cemented steel coil for sealing round rim for cardboard casings.
STC Steel coil cemented for stellar closure cardboard casings.
OTP Cemented steel coil for round rim closure for plastic casing.
BOP Coil in cemented steel for ball cartridges with round rim closure.
BN1/BN2/BN3/BN4 cemented steel coil for stellar closure.