English
Français
Italiano
Universal Arbor
Support in threaded M6 steel with inlay (spool), executed in one piece with CNC machines, universal and compatible with any type of steel or brass coil.
The screw can be inserted in any manual or column drill, thus obtaining in the closing phase of the cartridge a perfect rotation in the axis of the coil itself.
Related Products
Steel Counter-coil with universal external burnishing with rings inside suitable for Cal. 12 at Cal. 36/410 with M6 thread and complete with support and locking nut.
It is used for the placement of the casing in the phase of stellar engraving
This is an steel guide bushing, which is applied to the wheel reel and fastened with a lateral threaded grain.
Facilitates and guides the insertion of the casing in the hemming phase, respecting the vertical position.
Steel tool made with C.N.C., cemented and tempered machines, hand-cut and sharpening, with M 6 thread for drill attachment or any manual press, to be used for cutting cardboard and cork discs, complete with steel screw for Attachment and base for cutting.
Available in gauges 10/12/16/20/24/28/32/36/410
Engraver in cemented and tempered steel for the stellar closure (at 4 – 5 – 6 – 8 phasing).
Available in all gauges.
10/12/16/20/24/28/32/36/410
Low-profile coil made of steel with controlled machining
Numeric in one piece, indispensable to be used after the crimping phase at 4/6/8 Pliche.
Available in 10/12/16/20/24/28/32/36/410 gauges.
The Borre trim made of aluminum is designed to perform a precise trimming cut for the pipe edging of any model and brand, via a register screw for the desired heights.
Available in gauges 10/12/16/20/24/28/32/36/410
This is a manual oiler to be applied on the front with a motor flange fixing screw, compatible with any brand of relofading machine. Adjustable position by side knob.
Tool to be used to draw 3/4/5 petals on a borre sheath tube type LB6 and any type of Borre and can be mounted on the entire range of our GAEP machines and drilling machine on column drill.
Available in gauges 8 -10-12-16-20-24-28-32-36/410
Max Cutting Depth 55mm
Rotating engraver in tempered cemented steel, by means of an integrated system it allows to turn freely resuming with the “search folds” the folds of the recovery casings and stops at the point where the previous stellar had been made.
Available from Cal. 10 to Cal. 36/410
The Palmella holds the shell casings still, preventing it from overturning the contents during the loading phase.
Available in:
cal.12/16-20/24-28/32-36/410-8 flobert
Made with numerical control machines in cemented steel and tempered with three cutting blades, universal and suitable for all calipers from Cal. 10 to Cal. 36/410 and can be applied to a column drill or manual screwdriver by means of a special steel screw in Supplied, made with M6 female thread and can be applied to any type of manual machine.